SKIP TO MAIN CONTENT
01Supermicro
Barebone

AS-2126HS-TN Supermicro Hyper 2U Barebone, Dual AMD EPYC 9005/9004, 24 DDR5 DIMMs, Up to 24x NVMe

2U rack

AS-2126HS-TN is a 2U dual-socket AMD EPYC 9005/9004 Hyper barebone with 24 DDR5 slots (up to 6 TB), 8 to 24 front NVMe/SATA bays and up to 3 double-width GPUs.

Also known as · Supermicro Hyper H14 2U · EPYC 9005 2U server · Turin 2U server

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

The AS-2126HS-TN is the H14 2U Hyper A+ platform for two AMD EPYC 9005 or 9004 processors, supporting CPUs up to 500 W and as many as 384 cores per system. It is supplied as a barebone.

The H14DSH board offers 24 DDR5 slots for up to 6 TB at 6400 MT/s with EPYC 9005. Storage starts with 8 front 2.5-inch NVMe/SATA bays and expands to 24. Expansion runs to four double-width PCIe 5.0 slots or eight x8 slots plus one AIOM, with room for three double-width GPUs. Power supply wattage is selected at configuration.

03TECHNICAL DATA

Specifications

Platform

Supermicro AS-2126HS-TN Platform
Product typeBarebone platform: CPU, memory and drives not included
System boardSuper H14DSH
Included per parts listChassis CSE-HS201-R000NFP, H14DSH board, 35.25-in ball-bearing rails

Processor

Supermicro AS-2126HS-TN Processor
Sockets2 sockets
Supported processorsAMD EPYC 9005 / 9004 Series
Maximum coresUp to 384 cores / 768 threads per system
Maximum TDPUp to 500 W (above 400 W air-cooled only under specific conditions)

Memory

Supermicro AS-2126HS-TN Memory
DIMM slots24 DIMM slots, DDR5 ECC RDIMM (1DPC)
Maximum capacity6 TB; 6400 MT/s (EPYC 9005) or 4800 MT/s (EPYC 9004)

Storage

Supermicro AS-2126HS-TN Storage
Drive bays (default)8 front hot-swap 2.5" NVMe/SATA
Drive bay optionsOption: 24 front 2.5" NVMe/SATA bays
M.22x M.2 PCIe 3.0 x4 NVMe
Controller / RAIDNVMe/SATA support may require add-on storage controller and cables

Expansion & Networking

Supermicro AS-2126HS-TN Expansion & Networking
PCIe slots4x PCIe 5.0 x16 FHFL double-width or 8x PCIe 5.0 x8, plus 1x PCIe 5.0 x16 AIOM (OCP 3.0)
NetworkingVia AIOM (OCP NIC 3.0) slot
GPU supportUp to 3 double-width GPUs
CXLUp to 4 CXL 2.0 x16 devices

Power & Cooling

Supermicro AS-2126HS-TN Power & Cooling
Power supplies2x redundant; 1200 / 1300 (DC) / 1600 / 2000 / 2600 W options
FansUp to 6 counter-rotating 60 mm fans

Chassis

Supermicro AS-2126HS-TN Chassis
Form factor2U rack
Chassis modelCSE-HS201-R000NFP
Dimensions (H x W x D)3.5 x 17.2 x 31.74 in (88.9 x 437 x 806.2 mm)
Net weight45 lb (20.5 kg)
Rails35.25-in ball-bearing rail set included

Management & Security

Supermicro AS-2126HS-TN Management & Security
ManagementDedicated 1 GbE BMC LAN port; IPMI 2.0 with KVM-over-LAN and virtual media; Supermicro SSM and SuperCloud Composer
SecurityTPM 2.0, Silicon Root of Trust (NIST 800-193), signed firmware, Secure Boot, automatic firmware recovery

Before you order

Supermicro AS-2126HS-TN Before you order
Included componentsBarebone: CPU, memory and drives not included
Supermicro AS-2126HS-TN specifications
CategoryServers
Form factor2U rack
Warranty1-year ZaynTek

§ 04Questions

What changed from the AS-2125HS-TNR?

The H14 model supports EPYC 9005 natively with CPUs up to 500 W, faster 6400 MT/s memory, and more PCIe slot options.

How many cores can it run?

Up to 384 cores across two AMD EPYC 9005 processors.

Is there a pre-configured version?

Yes. AS-2126HS-TN-01-G2 is a factory pre-configured build with two EPYC 9005 CPUs and 1.5 TB of memory.

§ 05Related — Servers

View all

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.