SKIP TO MAIN CONTENT
01Supermicro
Barebone

AS-1126HS-TN Supermicro Hyper 1U Barebone, Dual AMD EPYC 9005/9004, 24 DDR5 DIMMs, 8-12x NVMe Bays

1U rack

AS-1126HS-TN is a 1U dual-socket AMD EPYC 9005/9004 Hyper barebone with 24 DDR5 slots (up to 6 TB), 8 or 12 front NVMe/SATA bays and three PCIe 5.0 x16 slots.

Also known as · Supermicro Hyper H14 1U · EPYC 9005 1U server · Turin 1U server

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

The AS-1126HS-TN is the 1U H14 Hyper A+ model for two AMD EPYC 9005 or 9004 processors at up to 500 W. It is supplied as a barebone platform.

There are 24 DDR5 slots for up to 6 TB, running at 6400 MT/s with EPYC 9005. Storage is 8 front 2.5-inch NVMe/SATA bays with a 12-bay option and two M.2 NVMe slots. Three PCIe 5.0 x16 slots plus one AIOM slot handle networking and accelerators, and the board supports up to four CXL 2.0 memory devices. Power supply wattage is chosen at configuration.

03TECHNICAL DATA

Specifications

Platform

Supermicro AS-1126HS-TN Platform
Product typeBarebone platform: CPU, memory and drives not included
System boardSuper H14DSH
Included per parts listChassis CSE-HS101-R000NFP, H14DSH board, 35.25-in ball-bearing rails

Processor

Supermicro AS-1126HS-TN Processor
Sockets2 sockets
Supported processorsAMD EPYC 9005 / 9004 Series
Maximum coresUp to 384 cores / 768 threads per system
Maximum TDPUp to 500 W (above 290 W air-cooled only under specific conditions)

Memory

Supermicro AS-1126HS-TN Memory
DIMM slots24 DIMM slots, DDR5 ECC RDIMM (1DPC)
Maximum capacity6 TB; 6400 MT/s (EPYC 9005) or 4800 MT/s (EPYC 9004)

Storage

Supermicro AS-1126HS-TN Storage
Drive bays (default)8 front hot-swap 2.5" NVMe/SATA
Drive bay optionsOption: 12 front 2.5" NVMe/SATA bays
M.22x M.2 PCIe 3.0 x4 NVMe
Controller / RAIDNVMe/SATA support may require add-on storage controller and cables

Expansion & Networking

Supermicro AS-1126HS-TN Expansion & Networking
PCIe slots1x PCIe 5.0 x16 FHHL + 2x PCIe 5.0 x16 FHFL + 1x PCIe 5.0 x16 AIOM (OCP 3.0)
NetworkingVia AIOM (OCP NIC 3.0) slot
GPU supportNot specified on manufacturer page
CXLUp to 4 CXL 2.0 x16 devices

Power & Cooling

Supermicro AS-1126HS-TN Power & Cooling
Power supplies2x redundant; 1200 / 1300 (DC) / 1600 / 2000 / 2600 W options
FansUp to 8 counter-rotating 40 mm fans

Chassis

Supermicro AS-1126HS-TN Chassis
Form factor1U rack
Chassis modelCSE-HS101-R000NFP
Dimensions (H x W x D)1.7 x 17.2 x 30.66 in (43 x 437 x 778.7 mm)
Net weight19.2 lb (8.7 kg)
Rails35.25-in ball-bearing rail set included

Management & Security

Supermicro AS-1126HS-TN Management & Security
ManagementDedicated 1 GbE BMC LAN port; IPMI 2.0 with KVM-over-LAN and virtual media; Supermicro SSM and SuperCloud Composer
SecurityTPM 2.0, Silicon Root of Trust (NIST 800-193), signed firmware, Secure Boot, automatic firmware recovery

Before you order

Supermicro AS-1126HS-TN Before you order
Included componentsBarebone: CPU, memory and drives not included
Supermicro AS-1126HS-TN specifications
CategoryServers
Form factor1U rack
Warranty1-year ZaynTek

§ 04Questions

Does AS-1126HS-TN support CXL memory?

Yes, up to four CXL 2.0 x16 devices.

Which EPYC generations are supported?

AMD EPYC 9005 and 9004 Series, up to 500 W TDP.

Is there a ready-built version?

Yes. AS-1126HS-TN-01-G2 is a pre-configured build with two EPYC 9005 CPUs and 1.5 TB of memory.

§ 05Related — Servers

View all

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.