7DCL1001NA Lenovo SR250 V3 1U rack, 1x Xeon E-2478 8C, 32GB DDR5, 8x 2.5in bays, RAID 5350-8i, 2x800W
Preconfigured SR250 V3 1U rack server (7DCL1001NA) with one Xeon E-2478 8-core CPU, 32 GB DDR5, 8x 2.5-inch bays with drives installed, RAID 5350-8i and dual 800 W power.
Also known as · Lenovo ThinkSystem SR250 V3 · SR250 V3 · SR250 V3 E-2478 · ThinkSystem 7DCL · 7DCL SR250 V3 · SR250 V3 8x 2.5 bays · Lenovo SR250 V3 preconfigured · SR250 V3 small business server
1-YR ZAYNTEK WARRANTY
Overview
The Lenovo ThinkSystem SR250 V3 is a 1U, single-socket rack server, 561 mm deep, aimed at small businesses and branch sites. It runs Intel Xeon E-2400 or Xeon 6300 processors with up to 128 GB of DDR5 ECC memory.
Model 7DCL1001NA pairs one Xeon E-2478 (8 cores, 2.8 GHz, 80 W) with 32 GB of DDR5 on a single module. It arrives with 3x 1.92 TB SSD in front bays and 2x 480 GB M.2 SATA boot drives on RAID 5350-8i. Power comes from two 800 W hot-swap power supplies in a redundant pair, with XClarity Controller 2 Platinum for remote management.
Specifications
This Configuration
| Model (MTM) | 7DCL1001NA |
|---|---|
| Form factor | 1U rack |
| Processor | 1x Intel Xeon E-2478 8C 2.8 GHz 80 W (Intel Xeon E-2400) |
| Memory installed | 1x 32GB DDR5 ECC UDIMM |
| Storage controller | ThinkSystem RAID 5350-8i 12Gb SAS/SATA adapter |
| Drive bays | 8x 2.5-inch hot-swap bays, plus M.2 SATA/x4 NVMe 2-bay adapter |
| Drives included | 3x 1.92 TB SSD in front bays; 2x 480 GB M.2 SATA boot drives |
| Networking | 2x onboard 1GbE RJ-45 (Broadcom BCM5720); dedicated 1GbE XCC2 management port |
| PCIe slots | 2x low-profile PCIe x8 slots plus internal x8 connector |
| Power supply | 2x 800 W hot-swap (redundant) |
| Fans | 4 fixed system fans |
| Management | XClarity Controller 2 Platinum |
| Rails | ThinkSystem Toolless Friction Rail v2 (4M17A13564) included |
Processor Platform
| Supported processors | One Intel Xeon E-2400, Xeon 6300 or Pentium G7400-series processor (up to 8 cores) |
|---|---|
| Sockets | 1 |
Memory
| Memory slots | 4 DDR5 ECC UDIMM slots, two channels, memory runs at 4400 MHz |
|---|---|
| Maximum memory | 128 GB with 4x 32 GB UDIMMs |
Storage
| Platform drive bays | Up to 10x 2.5-inch or 4x 3.5-inch drive bays, plus two M.2 drives on a PCIe adapter |
|---|
Expansion & Networking
| Expansion | Riser-dependent: two PCIe 4.0 x8 low-profile slots or one PCIe 5.0 x16 slot, plus an internal x8 connector |
|---|
Power & Management
| Power supply options | One fixed 300 W (80 PLUS Gold) or up to two hot-swap 800 W redundant supplies |
|---|---|
| Systems management | XClarity Controller 2 with dedicated 1GbE port; XCC2 Platinum upgrade optional |
Physical
| Dimensions | 434.4 x 43 x 561 mm (17.1 x 1.7 x 22.1 in), W x H x D |
|---|---|
| Weight | Up to 12.3 kg (27.1 lb) |
| Category | Servers |
|---|---|
| Form factor | 1U rack |
| Warranty | 1-year ZaynTek |
§ 04Questions
What storage is installed in the 7DCL1001NA?
3x 1.92 TB SSD in front bays and 2x 480 GB M.2 SATA boot drives, attached through the RAID 5350-8i controller. The remaining front bays are open for expansion.
How much memory can the SR250 V3 take?
This model ships with 32 GB. The platform has 4 DDR5 ECC UDIMM slots and reaches 128 GB with 4x 32 GB UDIMMs.
Is the 7DCL1001NA a single or dual power supply model?
It ships with two 800 W hot-swap power supplies in a redundant pair.
§ 05Related — Servers
View all7DCLA01WNA
7DCLA01XNA
7DCLA01ZNA
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
