7DCLA01XNA Lenovo SR250 V3 1U rack, 1x Xeon E-2456 6C, 16GB DDR5, 8x 2.5in bays, onboard SATA RAID, 800W
Preconfigured SR250 V3 1U rack server (7DCLA01XNA) with one Xeon E-2456 6-core CPU, 16 GB DDR5, 8x 2.5-inch bays (no drives), onboard SATA RAID and 800 W power.
Also known as · Lenovo ThinkSystem SR250 V3 · SR250 V3 · SR250 V3 E-2456 · ThinkSystem 7DCL · 7DCL SR250 V3 · SR250 V3 8x 2.5 bays · Lenovo SR250 V3 preconfigured · SR250 V3 small business server
1-YR ZAYNTEK WARRANTY
Overview
The Lenovo ThinkSystem SR250 V3 is a 1U, single-socket rack server, 561 mm deep, aimed at small businesses and branch sites. It runs Intel Xeon E-2400 or Xeon 6300 processors with up to 128 GB of DDR5 ECC memory.
Model 7DCLA01XNA pairs one Xeon E-2456 (6 cores, 3.3 GHz, 80 W) with 16 GB of DDR5 on a single module. Its eight 2.5-inch hot-swap bays are empty and run from onboard SATA RAID. Power comes from a single 800 W hot-swap power supply, with XClarity Controller 2 Standard for remote management.
Specifications
This Configuration
| Model (MTM) | 7DCLA01XNA |
|---|---|
| Form factor | 1U rack |
| Processor | 1x Intel Xeon E-2456 6C 3.3 GHz 80 W (Intel Xeon E-2400) |
| Memory installed | 1x 16GB DDR5 ECC UDIMM |
| Storage controller | Onboard SATA with Intel VROC software RAID; no RAID adapter |
| Drive bays | 8x 2.5-inch hot-swap bays |
| Drives included | None (all bays open) |
| Networking | 2x onboard 1GbE RJ-45 (Broadcom BCM5720); dedicated 1GbE XCC2 management port |
| PCIe slots | 2x low-profile PCIe x8 slots plus internal x8 connector |
| Power supply | 1x 800 W hot-swap |
| Fans | 4 fixed system fans |
| Management | XClarity Controller 2 Standard |
| Rails | ThinkSystem Toolless Friction Rail v2 (4M17A13564) included |
Processor Platform
| Supported processors | One Intel Xeon E-2400, Xeon 6300 or Pentium G7400-series processor (up to 8 cores) |
|---|---|
| Sockets | 1 |
Memory
| Memory slots | 4 DDR5 ECC UDIMM slots, two channels, memory runs at 4400 MHz |
|---|---|
| Maximum memory | 128 GB with 4x 32 GB UDIMMs |
Storage
| Platform drive bays | Up to 10x 2.5-inch or 4x 3.5-inch drive bays, plus two M.2 drives on a PCIe adapter |
|---|
Expansion & Networking
| Expansion | Riser-dependent: two PCIe 4.0 x8 low-profile slots or one PCIe 5.0 x16 slot, plus an internal x8 connector |
|---|
Power & Management
| Power supply options | One fixed 300 W (80 PLUS Gold) or up to two hot-swap 800 W redundant supplies |
|---|---|
| Systems management | XClarity Controller 2 with dedicated 1GbE port; XCC2 Platinum upgrade optional |
Physical
| Dimensions | 434.4 x 43 x 561 mm (17.1 x 1.7 x 22.1 in), W x H x D |
|---|---|
| Weight | Up to 12.3 kg (27.1 lb) |
| Category | Servers |
|---|---|
| Form factor | 1U rack |
| Warranty | 1-year ZaynTek |
§ 04Questions
Does the 7DCLA01XNA come with drives?
No. The 8x 2.5-inch hot-swap bays are open, so you can add the hard drives or SSDs your workload needs (SAS drives need a SAS RAID adapter or HBA, since this model uses onboard SATA).
How much memory can the SR250 V3 take?
This model ships with 16 GB. The platform has 4 DDR5 ECC UDIMM slots and reaches 128 GB with 4x 32 GB UDIMMs.
Is the 7DCLA01XNA a single or dual power supply model?
It ships with a single 800 W hot-swap power supply. The platform accepts a second hot-swap supply for redundancy.
§ 05Related — Servers
View all7DCLA021NA
7DCLA01WNA
7DCL1000NA
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
