
Images are for illustrative purposes only. Actual product may vary.
Dell PowerEdge R760 Starter Build (Performance): 2x Xeon Platinum 8470, 1TB DDR5, 24x 3.84TB NVMe, 2x NVIDIA L40S
A GPU-ready 2U PowerEdge R760 for AI and analytics: two 52-core Xeon Platinum 8470, 1 TB of DDR5, twenty-four 3.84 TB NVMe drives, two NVIDIA L40S GPUs and dual-port 100 GbE.
Also known as · R760 starter build · PowerEdge R760 GPU server · R760 L40S · R760 Xeon Platinum 8470
1-YR ZAYNTEK WARRANTY
Overview
This ZaynTek starter build takes the Dell PowerEdge R760 to its accelerated end. Two Xeon Platinum 8470 processors (52 cores each) run with 1 TB of DDR5, and the GPU-ready riser layout carries two NVIDIA L40S 48 GB accelerators for inference, rendering and analytics.
The 24-bay all-NVMe chassis is filled with 3.84 TB drives behind a PERC H965i tri-mode controller, with a mirrored BOSS-N1 boot device. A dual-port 100 GbE adapter, dual 1800 W Titanium power supplies sized for the GPUs, iDRAC9 Datacenter and TPM 2.0 complete the build.
- Suited to AI inference, GPU-accelerated analytics and high-throughput storage
- Sliding rails with a cable management arm
A starter build is a starting point, not a fixed SKU. Open it in the configurator to change any option; an engineer validates the final build before it is quoted.
Specifications
This build
| Chassis configuration | 24× NVMe Gen5 (all-flash) |
|---|---|
| Riser configuration | GPU-ready (2× DW + 2× SW PCIe Gen5) |
| Socket population | Dual socket (Required for >2 TB DDR5 / 32 DIMMs) |
| CPU model | Xeon Platinum 8470 (52C / 104T · 2.0 GHz · 105 MB · 350 W) |
| Memory configuration | 1 TB · 16× 64 GB DDR5-4800 RDIMM |
| Boot device | BOSS-N1 · 2× 480 GB M.2 NVMe (mirrored) |
| Data drives | 24× 3.84 TB NVMe Gen4 (92.16 TB raw) |
| RAID controller | PERC H965i (Tri-mode · 24G SAS / Gen4 NVMe) |
| OCP 3.0 networking | Intel E810-CQDA2 dual 100 GbE OCP |
| Additional NICs (PCIe) | None |
| GPU configuration | 2× NVIDIA L40S 48 GB · requires 2× 1800W PSU |
| Power supply | Dual 1800 W Titanium · GPU-ready |
| Rails & cable management | B16 + Cable Management Arm |
| iDRAC license | iDRAC9 Datacenter (telemetry, full automation) |
| Operating system / hypervisor | No OS — ship factory image |
| Security & TPM | TPM 2.0 (FIPS 140-2) |
| Category | Servers |
|---|---|
| Form factor | 2U rack |
| Warranty | 1-year ZaynTek |
§ 04Questions
Can I change this build?
Yes. Customize this build opens the PowerEdge R760 configurator with these options already selected. Change anything you need, then request a quote.
Why 1800 W power supplies?
Two L40S GPUs need the higher-rated supplies. The configurator flags the 1800 W option as the requirement for that GPU choice.
Can I swap the GPUs?
Yes. The configurator offers NVIDIA L4, L40S and H100 PCIe options for the R760. An engineer confirms power and cooling for the final mix.
§ 05Related — Servers
View allPowerEdge R760 Starter Build — Balanced: 2x Xeon Gold 6430, 512GB, 8x 3.84TB NVMe
PowerEdge R660 Starter Build — Balanced: 2x Xeon Gold 5416S, 256GB, 8x 1.92TB NVMe
PowerEdge R760 Starter Build — Entry: 1x Xeon Silver 4410Y, 128GB, 8x 1.92TB NVMe
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




