540-BCRK Solarflare X2522-PLUS Dual-Port 10/25GbE SFP28 PCIe 3.1 x8 NIC, Ultra-Low Latency, PTP
Dell 540-BCRK is a Solarflare XtremeScale X2522-PLUS dual-port 10/25GbE SFP28 adapter (PCIe 3.1 x8) with Onload, TCPDirect and IEEE 1588 PTP for ultra-low-latency networking.
Also known as · XtremeScale X2522 · Xilinx X2522 · AMD Solarflare X2522
1-YR ZAYNTEK WARRANTY
Overview
Dell 540-BCRK is a full-height Solarflare XtremeScale X2522-PLUS network adapter with two SFP28 ports that run at 10 or 25 Gigabit Ethernet. It uses the Solarflare SFC9250 controller on a PCIe 3.1 x8 host interface and ships with Dell firmware.
The PLUS version ships pre-configured for the ultra-low-latency features that set this card apart from ordinary 25GbE NICs: Onload and TCPDirect kernel-bypass stacks that move network processing into user space, and Precision Time Protocol (IEEE 1588-2008) with hardware packet timestamping. The card is rated for sub-microsecond hardware latency.
The card is aimed at electronic trading, market-data distribution and other latency-sensitive or time-synchronized applications. It also supports SR-IOV for virtualized hosts. Solarflare is now part of AMD through its acquisition of Xilinx.
Specifications
General
| Dell part number | 540-BCRK |
|---|---|
| Model | Solarflare XtremeScale X2522-PLUS (X2522-25G-PLUS) |
| Controller | Solarflare SFC9250 |
| Bracket | Full height |
| Firmware | Dell firmware |
| Current owner of Solarflare brand | AMD (Xilinx acquired Solarflare 2019; AMD completed Xilinx acquisition February 14, 2022) |
Network
| Ports | 2 x SFP28 |
|---|---|
| Data rates | 10GbE and 25GbE per port |
| Host interface | PCIe 3.1 x8 |
| Latency | Sub-microsecond hardware latency with Onload kernel bypass |
| Ethernet standards | IEEE 802.3-2012 (including 802.3bx), 802.3ad / 802.1AX link aggregation, 802.1Q / 802.1p VLAN, 1588-2008 PTPv2 |
| Typical power | 13.2 W |
Features
| Kernel bypass | Onload and TCPDirect |
|---|---|
| Time synchronization | IEEE 1588-2008 PTPv2 with hardware timestamping; on-board Stratum 3 oscillator |
| PLUS bundle | Hardware pre-configured for ultra-low-latency firmware, Onload, TCPDirect and PTP |
| SR-IOV | Up to 16 physical functions and 240 virtual functions per adapter |
| Virtual NICs | 2,048 guest-OS-protected vNICs |
| Tunneling offloads | VXLAN, NVGRE, GENEVE |
| Other offloads | Checksum offload, TSO, GSO, LSO, LRO, RSS, VLAN and Q-in-Q insertion/stripping, jumbo frames (9,000 bytes) |
| Operating systems | Red Hat Enterprise Linux, SUSE SLES, Windows Server, VMware ESXi |
| DPDK | DPDK poll mode driver supported |
| Management and boot | Dell iDRAC with Lifecycle Controller integration, PXE and UEFI boot, NC-SI and PLDM over MCTP |
Physical
| Board dimensions | 16.75 x 6.9 cm (6.6 x 2.7 in) |
|---|---|
| Operating temperature | 0 to 55 °C (32 to 131 °F) |
| Category | Server Parts |
|---|---|
| Warranty | 1-year ZaynTek |
§ 04Questions
What is Dell 540-BCRK?
It is a Dell-firmware, full-height Solarflare XtremeScale X2522-PLUS dual-port 10/25GbE SFP28 network adapter.
What does the PLUS in X2522-PLUS mean?
The PLUS version comes pre-configured with ultra-low-latency firmware for Onload, TCPDirect and Precision Time Protocol. Some of these features can still require separate software licenses, so confirm the licensing you need when you request a quote.
Does the X2522-PLUS support PTP hardware timestamping?
Yes. It supports IEEE 1588-2008 PTPv2 with hardware packet timestamping for time-synchronized applications.
Can the ports run at 10GbE?
Yes. Each SFP28 port runs at either 25GbE or 10GbE depending on the optic or cable and the switch port.
Who makes Solarflare adapters now?
Xilinx bought Solarflare in 2019, and AMD completed its purchase of Xilinx in February 2022, so the product line is now part of AMD.
§ 05Related — Server Parts
View allNOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




