330-BBZN Riser Config 10, Full Length: 1x8 FH Gen5, 1x16 LP Gen4, 1x16 FH Double-Wide GPU Gen5
Dell 330-BBZN is the full-length Riser Config 10: one x8 full-height PCIe 5.0 slot, one x16 low-profile PCIe 4.0 slot, and one x16 full-height PCIe 5.0 slot sized for a double-wide GPU.
Also known as · R1P FL riser · R2A riser · R4R riser
1-YR ZAYNTEK WARRANTY
Overview
The Dell 330-BBZN is a PCIe riser configuration for a 2U rack server. Dell calls it Riser Config 10 in its full-length form (Config 10-2), and it provides three expansion slots:
- one x8 full-height PCIe Gen5 slot
- one x16 low-profile PCIe Gen4 slot
- one x16 full-height, full-length PCIe Gen5 slot wide enough for a double-wide GPU or accelerator
Dell builds Config 10-2 from three riser modules: R1P FL (slot 2, the GPU-capable x16 Gen5 slot), R2A (slot 3, x16 Gen4 low profile) and R4R FL (slot 7, x8 Gen5 full height). All three slots hang off processor 1.
This is a single-processor layout: only processor 1 is populated with this riser set, and it works with a front-mounted PERC but not with rear drive bays. It suits one-socket builds that need one full-size GPU or accelerator plus a couple of network or storage adapters.
Specifications
Riser Configuration
| Dell part number | 330-BBZN |
|---|---|
| Configuration | Riser Config 10, full length |
| Slot A | 1x PCIe Gen5 x8, full height |
| Slot B | 1x PCIe Gen4 x16, low profile |
| Slot C | 1x PCIe Gen5 x16, full height, double-wide GPU capable |
| Total PCIe slots | 3 |
| Processors | Single-processor configuration only (processor 1 populated, one heat sink) |
| Double-wide GPU | One, in slot 2 only |
| Storage controller / rear drives | Front PERC only; rear drive bays not supported |
Riser Modules (Config 10-2)
| Riser 1 (R1P FL) | Slot 2: PCIe Gen5 x16, full height / full length, double-wide GPU capable; connects to processor 1 |
|---|---|
| Riser 2 (R2A) | Slot 3: PCIe Gen4 x16, low profile; connects to processor 1 |
| Riser 4 (R4R FL) | Slot 7: PCIe Gen5 x8 (x16 connector), full height / full length; connects to processor 1 |
| R1P FL service part (DPN) | M5MFW |
| Category | Server Parts |
|---|---|
| Warranty | 1-year ZaynTek |
§ 04Questions
What slots does Dell Riser Config 10 (330-BBZN) provide?
Three slots: one x8 full-height PCIe Gen5, one x16 low-profile PCIe Gen4, and one x16 full-height PCIe Gen5 slot sized for a double-wide GPU.
Can I install a GPU with the 330-BBZN riser configuration?
Yes, one. Dell supports a double-wide GPU only in slot 2 (riser R1P FL) with this configuration. Config 10-2 is a single-processor layout, so GPU support also depends on that one CPU, power supplies and cooling.
Which riser modules make up Riser Config 10?
Config 10-2 is built from R1P FL (slot 2), R2A (slot 3) and R4R FL (slot 7), all connected to processor 1.
Does Riser Config 10 work with two processors?
No. Riser Config 10-2 is a single-processor configuration; only the processor 1 socket is populated.
§ 05Related — Server Parts
View allNOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
