
Images are for illustrative purposes only. Actual product may vary.
P91247-B21 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 SSD
HPE P91247-B21: a 7.68 TB 2.5-inch read-intensive NVMe SSD on PCIe Gen4. It is rated for 1 drive write per day (14,016 TB written). Sequential reads reach up to 7,066 MiB/s and writes up to 6,347 MiB/s, with random reads up to 225,888 IOPS.
Also known as · HPE 7.68TB NVMe 2.5in SSD
1-YR ZAYNTEK WARRANTY
Overview
HPE P91247-B21 is a 7.68 TB 2.5-inch read-intensive NVMe SSD on PCIe Gen4. The read-intensive endurance class targets workloads that read far more than they write. It comes in a Basic Carrier.
It is rated for 1 drive write per day (14,016 TB written). Sequential reads reach up to 7,066 MiB/s and writes up to 6,347 MiB/s, with random reads up to 225,888 IOPS. It is built on TLC NAND flash. It has a ships with digitally signed firmware.
Key specifications
- Capacity: 7.68 TB
- Drive type: Solid-state drive
- Interface: NVMe (PCIe Gen4)
- Connector: U.3
- Endurance: Read intensive
- Form factor: 2.5in (SFF)
- Carrier: Basic Carrier
- Part description: 7.68TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 SSD
Rated performance and endurance
- Rated endurance: 1 DWPD
- Rated lifetime writes: 14,016 TB
- Endurance basis: 100% random 4 KiB writes over five years
- Sequential read (max): 7,066 MiB/s
- Sequential write (max): 6,347 MiB/s
- Random read (4 KiB, QD16): 225,888 IOPS
- Random write (4 KiB, QD16): 298,739 IOPS
- Random read, maximum (4 KiB): 944,867 IOPS
- Random write, maximum (4 KiB): 316,613 IOPS
- Average random read latency (4 KiB, QD1): 67 µs
Compatibility. A configuration option for the HPE ProLiant Compute DL345 Gen12, HPE ProLiant Compute DL360 Gen12, HPE ProLiant Compute DL380 Gen12 and 10 other models; an engineer confirms fit for your exact build at quote.
Specifications
Drive
| Type | Solid-state drive |
|---|---|
| Capacity | 7.68 TB |
| Interface | NVMe (PCIe Gen4) |
| Endurance | Read intensive |
| Carrier | Basic Carrier |
| Ports | Single-port |
| NAND type | TLC |
| Connector | U.3 |
Performance & endurance
| Rated endurance | 1 DWPD |
|---|---|
| Rated lifetime writes | 14,016 TB |
| Endurance basis | 100% random 4 KiB writes over five years |
| Sequential read (max) | 7,066 MiB/s |
| Sequential write (max) | 6,347 MiB/s |
| Random read (4 KiB, QD16) | 225,888 IOPS |
| Random write (4 KiB, QD16) | 298,739 IOPS |
| Random read, maximum (4 KiB) | 944,867 IOPS |
| Random write, maximum (4 KiB) | 316,613 IOPS |
| Average random read latency (4 KiB, QD1) | 67 µs |
| Average random write latency (4 KiB, QD1) | 16 µs |
Security
| Digitally signed firmware | Yes |
|---|
Power & environment
| Idle power | 4.17 W |
|---|---|
| Maximum power | 24 W |
| Power, sequential read | 14.14 W |
| Power, sequential write | 21.68 W |
| Power, random read | 17.53 W |
| Power, random write | 20.61 W |
| Power, random read/write | 20.98 W |
Physical
| Drive height (z-height) | 15 mm |
|---|---|
| Hot-plug | Yes |
| Category | Drives & SSDs |
|---|---|
| Form factor | 2.5in (SFF) |
| Warranty | 1-year ZaynTek |
§ 04Fits these servers
Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.
- HPE ProLiant Compute DL345 Gen12Configure
- HPE ProLiant Compute DL360 Gen12Configure
- HPE ProLiant Compute DL380 Gen12Configure
- HPE ProLiant Compute DL380a Gen12Configure
- HPE ProLiant Compute ML350 Gen12Configure
- HPE ProLiant DL145 Gen11Configure
- HPE ProLiant DL20 Gen11Configure
- HPE ProLiant DL325 Gen11Configure
- HPE ProLiant DL360 Gen11Configure
- HPE ProLiant DL365 Gen11Configure
- HPE ProLiant DL380 Gen11Configure
- HPE ProLiant DL380a Gen11Configure
- HPE ProLiant ML350 Gen11Configure
§ 05Related — Drives & SSDs
View allP61035-B21
P63837-B21
P64848-B21
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




