P85664-B21 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PQC27 CM9 SSD
HPE P85664-B21 is a 3.2 TB 2.5-inch mixed-use NVMe SSD over a PCIe Gen4 interface. It is rated for 3 drive writes per day over 5 years (17,520 TB written). Sequential reads reach up to 7,119 MiB/s and writes up to 6,836 MiB/s, with random reads up to 245,449 IOPS.
Also known as · HPE 3.2TB NVMe 2.5in SSD
1-YR ZAYNTEK WARRANTY
Overview
The HPE P85664-B21 is a 3.2 TB 2.5-inch mixed-use NVMe SSD over a PCIe Gen4 interface. Its mixed-use endurance class is meant for workloads with a balance of reads and writes. It is fitted in a Basic Carrier.
It is rated for 3 drive writes per day over 5 years (17,520 TB written). Sequential reads reach up to 7,119 MiB/s and writes up to 6,836 MiB/s, with random reads up to 245,449 IOPS. It has power-loss protection.
Specifications at a glance
- Capacity: 3.2 TB
- Drive type: Solid-state drive
- Interface: NVMe (PCIe Gen4)
- Connector: U.3
- Endurance: Mixed use
- Form factor: 2.5in (SFF)
- Carrier: Basic Carrier
- Part description: 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PQC27 CM9 SSD
Rated performance and endurance
- Rated endurance: 3 DWPD (5 years)
- Endurance (lifetime writes): 17,520 TB
- Sequential read (max): 7,119 MiB/s
- Sequential write (max): 6,836 MiB/s
- Random read (4 KiB, QD16): 245,449 IOPS
- Random write (4 KiB, QD16): 657,218 IOPS
- Random read, maximum (4 KiB): 1,782,128 IOPS at QD512
- Random write, maximum (4 KiB): 658,228 IOPS at QD32
- Average random read latency (4 KiB, QD1): 62 µs
- Average random write latency (4 KiB, QD1): 6 µs
Compatibility. Listed as a configuration option for the HPE ProLiant Compute DL360 Gen12, HPE ProLiant Compute DL380 Gen12, HPE ProLiant Compute DL380a Gen12 and 7 other models. An engineer confirms fit for your exact build at quote.
Specifications
Drive
| Type | Solid-state drive |
|---|---|
| Capacity | 3.2 TB |
| Interface | NVMe (PCIe Gen4) |
| Endurance | Mixed use |
| Carrier | Basic Carrier |
| Interface ports | Single-port |
| NAND type | TLC |
Performance & endurance
| Rated endurance | 3 DWPD (5 years) |
|---|---|
| Endurance (lifetime writes) | 17,520 TB |
| Sequential read (max) | 7,119 MiB/s |
| Sequential write (max) | 6,836 MiB/s |
| Random read (4 KiB, QD16) | 245,449 IOPS |
| Random write (4 KiB, QD16) | 657,218 IOPS |
| Random read, maximum (4 KiB) | 1,782,128 IOPS at QD512 |
| Random write, maximum (4 KiB) | 658,228 IOPS at QD32 |
| Average random read latency (4 KiB, QD1) | 62 µs |
| Average random write latency (4 KiB, QD1) | 6 µs |
Reliability
| Power-loss protection | Yes (surprise power-loss protection) |
|---|---|
| Data-path protection | Full data-path error detection |
Security
| Digitally signed firmware | Yes |
|---|
Power & environment
| Power, idle | 2.84 W |
|---|---|
| Power, maximum | 18.20 W |
| Power, sequential read | 11.58 W |
| Power, sequential write | 18.03 W |
| Power, random read | 14.80 W |
| Power, random write | 16.66 W |
| Power, random read/write | 17.16 W |
Physical
| Drive height (z-height) | 15 mm |
|---|---|
| Hot-plug | Yes |
| Category | Drives & SSDs |
|---|---|
| Form factor | 2.5in (SFF) |
| Warranty | 1-year ZaynTek |
§ 04Fits these servers
Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.
- HPE ProLiant Compute DL360 Gen12Configure
- HPE ProLiant Compute DL380 Gen12Configure
- HPE ProLiant Compute DL380a Gen12Configure
- HPE ProLiant Compute ML350 Gen12Configure
- HPE ProLiant DL145 Gen11Configure
- HPE ProLiant DL360 Gen11Configure
- HPE ProLiant DL365 Gen11Configure
- HPE ProLiant DL380 Gen11Configure
- HPE ProLiant DL380a Gen11Configure
- HPE ProLiant ML350 Gen11Configure
§ 05Related — Drives & SSDs
View allP61051-B21
P63849-B21
P70426-B21
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
