
Images are for illustrative purposes only. Actual product may vary.
P84244-K21 3.84TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 SPDM 7500 SSD
The HPE P84244-K21 is a 3.84 TB 2.5-inch read-intensive NVMe SSD over a PCIe Gen4 interface. It is rated for 1 drive write per day over 5 years (7,008 TB written). Sequential reads reach up to 6,631 MiB/s and writes up to 5,276 MiB/s, with random reads up to 218,219 IOPS.
Also known as · HPE 3.84TB NVMe 2.5in SSD
1-YR ZAYNTEK WARRANTY
Overview
HPE P84244-K21 — a 3.84 TB 2.5-inch read-intensive NVMe SSD over a PCIe Gen4 interface. Its read-intensive endurance class is meant for workloads that read far more than they write. It is fitted in a Basic Carrier.
It is rated for 1 drive write per day over 5 years (7,008 TB written). Sequential reads reach up to 6,631 MiB/s and writes up to 5,276 MiB/s, with random reads up to 218,219 IOPS. It supports device authentication and attestation. It has power-loss protection.
Key specifications
- Capacity: 3.84 TB
- Drive type: Solid-state drive
- Interface: NVMe (PCIe Gen4)
- Connector: U.3
- Endurance: Read intensive
- Form factor: 2.5in (SFF)
- Carrier: Basic Carrier
- Part description: 3.84TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 SPDM 7500 SSD
Rated performance and endurance
- Rated endurance: 1.0 DWPD (5 years)
- Endurance (lifetime writes): 7,008 TB
- Sequential read (max): 6,631 MiB/s
- Sequential write (max): 5,276 MiB/s
- Random read (4 KiB, QD16): 218,219 IOPS
- Random write (4 KiB, QD16): 187,779 IOPS
- Random read, maximum (4 KiB): 1,099,379 IOPS at QD256
- Random write, maximum (4 KiB): 192,70 IOPS at QD16
- Average random read latency (4 KiB, QD1): 70 µs
- Average random write latency (4 KiB, QD1): 15 µs
Compatibility. Offered as a configuration option for the HPE Alletra Storage Server 4110, HPE Alletra Storage Server 4120 and HPE Alletra Storage Server 4140. An engineer confirms fit for your exact build at quote.
Specifications
Drive
| Type | Solid-state drive |
|---|---|
| Capacity | 3.84 TB |
| Interface | NVMe (PCIe Gen4) |
| Endurance | Read intensive |
| Carrier | Basic Carrier |
| Interface ports | Single-port |
| NAND type | TLC |
| Connector | U.3 |
Performance & endurance
| Rated endurance | 1.0 DWPD (5 years) |
|---|---|
| Endurance (lifetime writes) | 7,008 TB |
| Sequential read (max) | 6,631 MiB/s |
| Sequential write (max) | 5,276 MiB/s |
| Random read (4 KiB, QD16) | 218,219 IOPS |
| Random write (4 KiB, QD16) | 187,779 IOPS |
| Random read, maximum (4 KiB) | 1,099,379 IOPS at QD256 |
| Random write, maximum (4 KiB) | 192,70 IOPS at QD16 |
| Average random read latency (4 KiB, QD1) | 70 µs |
| Average random write latency (4 KiB, QD1) | 15 µs |
Reliability
| Power-loss protection | Yes (surprise power-loss protection) |
|---|---|
| Data-path protection | Full data-path error detection |
Security
| Digitally signed firmware | Yes |
|---|---|
| Device attestation | Supported |
Power & environment
| Power, idle | 5.00 W |
|---|---|
| Power, maximum | 11.90 W |
| Power, sequential read | 9.50 W |
| Power, sequential write | 11.60 W |
| Power, random read | 9.30 W |
| Power, random write | 9.50 W |
| Power, mixed random read/write | 9.20 W |
Physical
| Drive height (z-height) | 15 mm |
|---|---|
| Hot-plug | Yes |
| Category | Drives & SSDs |
|---|---|
| Form factor | 2.5in (SFF) |
| Warranty | 1-year ZaynTek |
§ 04Fits these servers
Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.
§ 05Related — Drives & SSDs
View allP63833-K21
P64846-K21
P78806-K21
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




