
Images are for illustrative purposes only. Actual product may vary.
P70428-B21 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PS1030 SSD
HPE P70428-B21 is a 6.4 TB 2.5-inch mixed-use NVMe SSD on PCIe Gen4. It is rated for 3.43 drive writes per day over 5 years (40,062 TB written). Sequential reads reach up to 7,066 MiB/s and writes up to 6,345 MiB/s, with random reads up to 251,921 IOPS.
Also known as · HPE 6.4TB NVMe 2.5in SSD
1-YR ZAYNTEK WARRANTY
Overview
The HPE P70428-B21 is a 6.4 TB 2.5-inch mixed-use NVMe SSD on PCIe Gen4. The mixed-use endurance class targets workloads with a balance of reads and writes. It comes in a Basic Carrier.
It is rated for 3.43 drive writes per day over 5 years (40,062 TB written). Sequential reads reach up to 7,066 MiB/s and writes up to 6,345 MiB/s, with random reads up to 251,921 IOPS.
Key facts
- Capacity: 6.4 TB
- Drive type: Solid-state drive
- Interface: NVMe (PCIe Gen4)
- Connector: U.3
- Endurance: Mixed use
- Form factor: 2.5in (SFF)
- Carrier: Basic Carrier
- Part description: 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PS1030 SSD
Rated performance and endurance
- Rated endurance: 3.43 drive writes per day for 5 years
- Lifetime writes: 40,062 TB written
- Sequential read / write: Up to 7,066 / 6,345 MiB/s
- Random 4K read / write (QD16): 251,921 / 732,734 IOPS
- Peak random 4K read / write: 903,765 (QD256) / 794,791 (QD256) IOPS
- Average latency read / write (4K, QD1): 60 / 14 µs
- Idle power: 4.23 W
- Active power (random read / random write / sequential read / sequential write): 15.16 / 19.48 / 12.75 / 15.62 W
- Maximum power: 20.31 W
Compatibility. Listed as a configuration option for the HPE ProLiant Compute DL320 Gen12, HPE ProLiant Compute DL325 Gen12, HPE ProLiant Compute DL340 Gen12 and 15 other models. An engineer confirms fit for your exact build at quote.
Specifications
Drive
| Type | Solid-state drive |
|---|---|
| Capacity | 6.4 TB |
| Interface | NVMe (PCIe Gen4) |
| Endurance | Mixed use |
| Carrier | Basic Carrier |
| Port configuration | Single port |
| NAND type | TLC |
| Connector | U.3 |
Performance & endurance
| Rated endurance | 3.43 drive writes per day for 5 years |
|---|---|
| Lifetime writes | 40,062 TB written |
| Sequential read / write | Up to 7,066 / 6,345 MiB/s |
| Random 4K read / write (QD16) | 251,921 / 732,734 IOPS |
| Peak random 4K read / write | 903,765 (QD256) / 794,791 (QD256) IOPS |
| Average latency read / write (4K, QD1) | 60 / 14 µs |
Security
| Firmware | Digitally signed firmware |
|---|
Power & environment
| Idle power | 4.23 W |
|---|---|
| Active power (random read / random write / sequential read / sequential write) | 15.16 / 19.48 / 12.75 / 15.62 W |
| Maximum power | 20.31 W |
Physical
| Drive height (z-height) | 15 mm |
|---|---|
| Hot-plug | Hot-plug, Basic Carrier |
| Category | Drives & SSDs |
|---|---|
| Form factor | 2.5in (SFF) |
| Warranty | 1-year ZaynTek |
§ 04Fits these servers
Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.
- HPE ProLiant Compute DL320 Gen12Configure
- HPE ProLiant Compute DL325 Gen12Configure
- HPE ProLiant Compute DL340 Gen12Configure
- HPE ProLiant Compute DL345 Gen12Configure
- HPE ProLiant Compute DL360 Gen12Configure
- HPE ProLiant Compute DL380 Gen12Configure
- HPE ProLiant Compute DL380a Gen12Configure
- HPE ProLiant Compute DL580 Gen12Configure
- HPE ProLiant Compute ML350 Gen12Configure
- HPE ProLiant DL145 Gen11Configure
- HPE ProLiant DL20 Gen11Configure
- HPE ProLiant DL325 Gen11Configure
- HPE ProLiant DL345 Gen11Configure
- HPE ProLiant DL360 Gen11Configure
- HPE ProLiant DL365 Gen11Configure
- HPE ProLiant DL380 Gen11Configure
- HPE ProLiant DL560 Gen11Configure
- HPE ProLiant ML350 Gen11Configure
§ 05Related — Drives & SSDs
View allP85666-B21
P91241-B21
P61059-B21
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




