SKIP TO MAIN CONTENT
HPE P63837-K21 — angled view

Images are for illustrative purposes only. Actual product may vary.

01HPE

P63837-K21 7.68 TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD

Drives & SSDs

HPE P63837-K21: a 7.68 TB 2.5-inch read-intensive NVMe SSD over a PCIe Gen4 interface. It is rated for 1 drive write per day (14,016 TB written). Sequential reads reach up to 7,165 MiB/s and writes up to 6,831 MiB/s, with random reads up to 225,888 IOPS.

Also known as · HPE 7.68TB NVMe 2.5in SSD

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

HPE P63837-K21 is a 7.68 TB 2.5-inch read-intensive NVMe SSD over a PCIe Gen4 interface. Its read-intensive endurance class is meant for workloads that read far more than they write. It is fitted in a Basic Carrier.

It is rated for 1 drive write per day (14,016 TB written). Sequential reads reach up to 7,165 MiB/s and writes up to 6,831 MiB/s, with random reads up to 225,888 IOPS. It is built on TLC NAND flash. It has a dual-port design for redundant host paths. It has a ships with digitally signed firmware.

Specifications at a glance

  • Capacity: 7.68 TB
  • Drive type: Solid-state drive
  • Interface: NVMe (PCIe Gen4)
  • Connector: U.3
  • Endurance: Read intensive
  • Form factor: 2.5in (SFF)
  • Carrier: Basic Carrier
  • Part description: 7.68 TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD

Rated performance and endurance

  • Rated endurance: 1 DWPD
  • Rated lifetime writes: 14,016 TB
  • Endurance basis: 100% random 4 KiB writes over five years
  • Sequential read (max): 7,165 MiB/s
  • Sequential write (max): 6,831 MiB/s
  • Random read (4 KiB, QD16): 225,888 IOPS
  • Random write (4 KiB, QD16): 298,739 IOPS
  • Random read, maximum (4 KiB): 1,202,924 IOPS
  • Random write, maximum (4 KiB): 316,613 IOPS
  • Average random read latency (4 KiB, QD1): 67 µs

Compatibility. Listed as a configuration option for the HPE Alletra Storage Server 4110 and HPE Alletra Storage Server 4120. An engineer confirms fit for your exact build at quote.

03TECHNICAL DATA

Specifications

Drive

HPE P63837-K21 Drive
TypeSolid-state drive
Capacity7.68 TB
InterfaceNVMe (PCIe Gen4)
EnduranceRead intensive
CarrierBasic Carrier
PortsDual-port
NAND typeTLC
ConnectorU.3

Performance & endurance

HPE P63837-K21 Performance & endurance
Rated endurance1 DWPD
Rated lifetime writes14,016 TB
Endurance basis100% random 4 KiB writes over five years
Sequential read (max)7,165 MiB/s
Sequential write (max)6,831 MiB/s
Random read (4 KiB, QD16)225,888 IOPS
Random write (4 KiB, QD16)298,739 IOPS
Random read, maximum (4 KiB)1,202,924 IOPS
Random write, maximum (4 KiB)316,613 IOPS
Average random read latency (4 KiB, QD1)67 µs
Average random write latency (4 KiB, QD1)11 µs

Security

HPE P63837-K21 Security
Digitally signed firmwareYes

Power & environment

HPE P63837-K21 Power & environment
Idle power3.62 W
Maximum power24 W
Power, sequential read14.14 W
Power, sequential write21.68 W
Power, random read17.53 W
Power, random write19.69 W
Power, random read/write19.58 W

Physical

HPE P63837-K21 Physical
Drive height (z-height)15 mm
Hot-plugYes
HPE P63837-K21 specifications
CategoryDrives & SSDs
Form factor2.5in (SFF)
Warranty1-year ZaynTek

§ 04Fits these servers

Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.

§ 05Related — Drives & SSDs

View all
HPE

P64848-K21

Drives & SSDs
Request quote
HPE

P70434-K21

Drives & SSDs
Request quote
HPE

P84242-K21

Drives & SSDs
Request quote
HPE

P61035-K21

Drives & SSDs
Request quote

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.

HPE P63837-K21 — 7.68 TB NVMe Gen4 High | ZaynTek