SKIP TO MAIN CONTENT
HPE P63829-K21 — angled view

Images are for illustrative purposes only. Actual product may vary.

01HPE

P63829-K21 1.92 TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD

Drives & SSDs

HPE P63829-K21 is a 1.92 TB 2.5-inch read-intensive NVMe SSD on PCIe Gen4. It is rated for 1 drive write per day (3,504 TB written). Sequential reads reach up to 7,160 MiB/s and writes up to 3,421 MiB/s, with random reads up to 222,075 IOPS.

Also known as · HPE 1.92TB NVMe 2.5in SSD

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

The HPE P63829-K21 is a 1.92 TB 2.5-inch read-intensive NVMe SSD on PCIe Gen4. The read-intensive endurance class targets workloads that read far more than they write. It comes in a Basic Carrier.

It is rated for 1 drive write per day (3,504 TB written). Sequential reads reach up to 7,160 MiB/s and writes up to 3,421 MiB/s, with random reads up to 222,075 IOPS. It is built on TLC NAND flash. It has a dual-port design for redundant host paths. It has a ships with digitally signed firmware.

Specifications at a glance

  • Capacity: 1.92 TB
  • Drive type: Solid-state drive
  • Interface: NVMe (PCIe Gen4)
  • Connector: U.3
  • Endurance: Read intensive
  • Form factor: 2.5in (SFF)
  • Carrier: Basic Carrier
  • Part description: 1.92 TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 CM7 SSD

Rated performance and endurance

  • Rated endurance: 1 DWPD
  • Rated lifetime writes: 3,504 TB
  • Endurance basis: 100% random 4 KiB writes over five years
  • Sequential read (max): 7,160 MiB/s
  • Sequential write (max): 3,421 MiB/s
  • Random read (4 KiB, QD16): 222,075 IOPS
  • Random write (4 KiB, QD16): 161,441 IOPS
  • Random read, maximum (4 KiB): 1,198,665 IOPS
  • Random write, maximum (4 KiB): 161,460 IOPS
  • Average random read latency (4 KiB, QD1): 67 µs

Compatibility. Offered as a configuration option for the HPE Alletra Storage Server 4110 and HPE Alletra Storage Server 4120. An engineer confirms fit for your exact build at quote.

03TECHNICAL DATA

Specifications

Drive

HPE P63829-K21 Drive
TypeSolid-state drive
Capacity1.92 TB
InterfaceNVMe (PCIe Gen4)
EnduranceRead intensive
CarrierBasic Carrier
PortsDual-port
NAND typeTLC
ConnectorU.3

Performance & endurance

HPE P63829-K21 Performance & endurance
Rated endurance1 DWPD
Rated lifetime writes3,504 TB
Endurance basis100% random 4 KiB writes over five years
Sequential read (max)7,160 MiB/s
Sequential write (max)3,421 MiB/s
Random read (4 KiB, QD16)222,075 IOPS
Random write (4 KiB, QD16)161,441 IOPS
Random read, maximum (4 KiB)1,198,665 IOPS
Random write, maximum (4 KiB)161,460 IOPS
Average random read latency (4 KiB, QD1)67 µs
Average random write latency (4 KiB, QD1)11 µs

Security

HPE P63829-K21 Security
Digitally signed firmwareYes

Power & environment

HPE P63829-K21 Power & environment
Idle power3.6 W
Maximum power18 W
Power, sequential read13.02 W
Power, sequential write13.49 W
Power, random read15.53 W
Power, random write12.54 W
Power, random read/write12.8 W

Physical

HPE P63829-K21 Physical
Drive height (z-height)15 mm
Hot-plugYes
HPE P63829-K21 specifications
CategoryDrives & SSDs
Form factor2.5in (SFF)
Warranty1-year ZaynTek

§ 04Fits these servers

Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.

§ 05Related — Drives & SSDs

View all
HPE

P64844-K21

Drives & SSDs
Request quote
HPE

P50216-K21

Drives & SSDs
Request quote
HPE

P61019-K21

Drives & SSDs
Request quote
HPE

P63833-K21

Drives & SSDs
Request quote

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.