SKIP TO MAIN CONTENT
HPE P50230-B21 — angled view

Images are for illustrative purposes only. Actual product may vary.

01HPE

P50230-B21 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD

Drives & SSDs

HPE P50230-B21 is a 3.2 TB 2.5-inch mixed-use NVMe SSD over a PCIe Gen4 interface. It is rated for 3 drive writes per day (17,520 TB written). Sequential reads reach up to 7,100 MiB/s and writes up to 4,200 MiB/s, with random reads up to 225,000 IOPS.

Also known as · HPE 3.2TB NVMe 2.5in SSD

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

HPE P50230-B21 — a 3.2 TB 2.5-inch mixed-use NVMe SSD over a PCIe Gen4 interface. Its mixed-use endurance class is meant for workloads with a balance of reads and writes. It is fitted in a Basic Carrier.

It is rated for 3 drive writes per day (17,520 TB written). Sequential reads reach up to 7,100 MiB/s and writes up to 4,200 MiB/s, with random reads up to 225,000 IOPS. It is built on TLC NAND flash. It has a dual-port design for redundant host paths. It has a ships with digitally signed firmware.

Specifications at a glance

  • Capacity: 3.2 TB
  • Drive type: Solid-state drive
  • Interface: NVMe (PCIe Gen4)
  • Connector: U.3
  • Endurance: Mixed use
  • Form factor: 2.5in (SFF)
  • Carrier: Basic Carrier
  • Part description: 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD

Rated performance and endurance

  • Rated endurance: 3 DWPD
  • Rated lifetime writes: 17,520 TB
  • Endurance basis: 100% random 4 KiB writes over five years
  • Sequential read (max): 7,100 MiB/s
  • Sequential write (max): 4,200 MiB/s
  • Random read (4 KiB, QD16): 225,000 IOPS
  • Random write (4 KiB, QD16): 310,000 IOPS
  • Random read, maximum (4 KiB): 1,350,000 IOPS
  • Random write, maximum (4 KiB): 320,000 IOPS
  • Average random read latency (4 KiB, QD1): 70 µs

Compatibility. A configuration option for the HPE ProLiant Compute DL320 Gen12, HPE ProLiant Compute DL580 Gen12, HPE ProLiant DL145 Gen11 and HPE ProLiant DL20 Gen11; an engineer confirms fit for your exact build at quote.

03TECHNICAL DATA

Specifications

Drive

HPE P50230-B21 Drive
TypeSolid-state drive
Capacity3.2 TB
InterfaceNVMe (PCIe Gen4)
EnduranceMixed use
CarrierBasic Carrier
PortsDual-port
NAND typeTLC
ConnectorU.3

Performance & endurance

HPE P50230-B21 Performance & endurance
Rated endurance3 DWPD
Rated lifetime writes17,520 TB
Endurance basis100% random 4 KiB writes over five years
Sequential read (max)7,100 MiB/s
Sequential write (max)4,200 MiB/s
Random read (4 KiB, QD16)225,000 IOPS
Random write (4 KiB, QD16)310,000 IOPS
Random read, maximum (4 KiB)1,350,000 IOPS
Random write, maximum (4 KiB)320,000 IOPS
Average random read latency (4 KiB, QD1)70 µs
Average random write latency (4 KiB, QD1)19 µs

Security

HPE P50230-B21 Security
Digitally signed firmwareYes

Power & environment

HPE P50230-B21 Power & environment
Idle power4.6 W
Maximum power18.4 W
Power, sequential read14.6 W
Power, sequential write18.4 W
Power, random read17.1 W
Power, random write15.1 W
Power, random read/write15.8 W

Physical

HPE P50230-B21 Physical
Drive height (z-height)15 mm
Hot-plugYes
HPE P50230-B21 specifications
CategoryDrives & SSDs
Form factor2.5in (SFF)
Warranty1-year ZaynTek

§ 04Fits these servers

Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.

§ 05Related — Drives & SSDs

View all
HPE

P61051-B21

Drives & SSDs
Request quote
HPE

P65015-B21

Drives & SSDs
Request quote
HPE

P70426-B21

Drives & SSDs
Request quote
HPE

P63849-B21

Drives & SSDs
Request quote

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.