
Images are for illustrative purposes only. Actual product may vary.
P47808-B21 960GB SATA 6G Read Intensive LFF LPC SSD
The HPE P47808-B21 is a 960 GB 3.5-inch read-intensive SATA SSD on a 6 Gb/s link. It is rated for 0.8 drive writes per day over 5 years (1,400 TB written). Sequential reads reach up to 506 MiB/s and writes up to 480 MiB/s, with random reads up to 63,000 IOPS.
Also known as · HPE 960GB SATA 3.5in SSD
1-YR ZAYNTEK WARRANTY
Overview
The HPE P47808-B21 is a 960 GB 3.5-inch read-intensive SATA SSD on a 6 Gb/s link. Its read-intensive endurance class is meant for workloads that read far more than they write.
It is rated for 0.8 drive writes per day over 5 years (1,400 TB written). Sequential reads reach up to 506 MiB/s and writes up to 480 MiB/s, with random reads up to 63,000 IOPS.
Key facts
- Capacity: 960 GB
- Drive type: Solid-state drive
- Interface: SATA 6 Gb/s
- Endurance: Read intensive
- Form factor: 3.5in (LFF)
- Part description: 960GB SATA 6G Read Intensive LFF LPC SSD
Rated performance and endurance
- Rated endurance: 0.8 drive writes per day for 5 years
- Lifetime writes: 1,400 TB written
- Sequential read / write: Up to 506 / 480 MiB/s
- Random 4K read / write (QD16): 63,000 / 29,000 IOPS
- Peak random 4K read / write: 73,000 (QD32) / 29,000 (QD4) IOPS
- Average latency read / write (4K, QD1): 125 / 53 µs
- Idle power: 1.50 W
- Active power (random read / random write / sequential read / sequential write): 4.05 / 4.05 / 3.10 / 4.00 W
- Maximum power: 5.00 W
Compatibility. A configuration option for the HPE ProLiant Compute DL320 Gen12, HPE ProLiant Compute DL325 Gen12, HPE ProLiant Compute DL340 Gen12 and 14 other models; an engineer confirms fit for your exact build at quote.
Specifications
Drive
| Type | Solid-state drive |
|---|---|
| Capacity | 960 GB |
| Interface | SATA 6Gb/s |
| Endurance | Read intensive |
| Port configuration | Single port |
| NAND type | TLC |
Performance & endurance
| Rated endurance | 0.8 drive writes per day for 5 years |
|---|---|
| Lifetime writes | 1,400 TB written |
| Sequential read / write | Up to 506 / 480 MiB/s |
| Random 4K read / write (QD16) | 63,000 / 29,000 IOPS |
| Peak random 4K read / write | 73,000 (QD32) / 29,000 (QD4) IOPS |
| Average latency read / write (4K, QD1) | 125 / 53 µs |
Security
| Firmware | Digitally signed firmware |
|---|
Power & environment
| Idle power | 1.50 W |
|---|---|
| Active power (random read / random write / sequential read / sequential write) | 4.05 / 4.05 / 3.10 / 4.00 W |
| Maximum power | 5.00 W |
Physical
| Drive height (z-height) | 7 mm |
|---|---|
| Hot-plug | Hot-plug, Low Profile LFF carrier |
| Category | Drives & SSDs |
|---|---|
| Form factor | 3.5in (LFF) |
| Warranty | 1-year ZaynTek |
§ 04Fits these servers
Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.
- HPE ProLiant Compute DL320 Gen12Configure
- HPE ProLiant Compute DL325 Gen12Configure
- HPE ProLiant Compute DL340 Gen12Configure
- HPE ProLiant Compute DL340e Gen12Configure
- HPE ProLiant Compute DL345 Gen12Configure
- HPE ProLiant Compute DL360 Gen12Configure
- HPE ProLiant Compute DL380 Gen12Configure
- HPE ProLiant Compute ML350 Gen12Configure
- HPE ProLiant DL20 Gen11Configure
- HPE ProLiant DL320 Gen11Configure
- HPE ProLiant DL325 Gen11Configure
- HPE ProLiant DL345 Gen11Configure
- HPE ProLiant DL360 Gen11Configure
- HPE ProLiant DL380 Gen11Configure
- HPE ProLiant ML110 Gen11Configure
- HPE ProLiant ML30 Gen11Configure
- HPE ProLiant ML350 Gen11Configure
§ 05Related — Drives & SSDs
View allP53554-B21
P68585-B21
P80578-B21
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.




