SKIP TO MAIN CONTENT
HPE P18436-B21 — angled view

Images are for illustrative purposes only. Actual product may vary.

01HPE

P18436-B21 1.92TB SATA 6G Mixed Use SFF SC SSD

Drives & SSDs

HPE P18436-B21 is a 1.92 TB 2.5-inch mixed-use SATA SSD over a 6 Gb/s interface. It is rated for 3 drive writes per day over 5 years (10,000 TB written). Sequential reads reach up to 516 MiB/s and writes up to 480 MiB/s, with random reads up to 59,000 IOPS.

Also known as · HPE 1.92TB SATA 2.5in SSD

Price
Request quote
REQUEST QUOTE469.476.5010
NO CARD · NO COMMITMENT · NET-30 / GSA / PO ALL ACCEPTED
1-YR ZAYNTEK WARRANTY
02PRODUCT OVERVIEW

Overview

The HPE P18436-B21 is a 1.92 TB 2.5-inch mixed-use SATA SSD over a 6 Gb/s interface. The mixed-use endurance class targets workloads with a balance of reads and writes. It comes in a Smart Carrier.

It is rated for 3 drive writes per day over 5 years (10,000 TB written). Sequential reads reach up to 516 MiB/s and writes up to 480 MiB/s, with random reads up to 59,000 IOPS. It is a thin 7 mm drive that tops out at 5 W.

Key facts

  • Capacity: 1.92 TB
  • Drive type: Solid-state drive
  • Interface: SATA 6 Gb/s
  • Endurance: Mixed use
  • Form factor: 2.5in (SFF)
  • Carrier: Smart Carrier
  • Part description: 1.92TB SATA 6G Mixed Use SFF SC SSD

Rated performance and endurance

  • Rated endurance: 3.0 drive writes per day for 5 years
  • Lifetime writes: 10,000 TB written
  • Sequential read / write: Up to 516 / 480 MiB/s
  • Random 4K read / write (QD16): 59,000 / 31,000 IOPS
  • Peak random 4K read / write: 71,000 (QD32) / 31,000 (QD4) IOPS
  • Average latency read / write (4K, QD1): 125 / 52 µs
  • Idle power: 1.50 W
  • Active power (random read / random write / sequential read / sequential write): 3.90 / 3.90 / 3.20 / 4.10 W
  • Maximum power: 5.00 W

Compatibility. Listed as a configuration option for the HPE ProLiant DL360 Gen10. An engineer confirms fit for your exact build at quote.

03TECHNICAL DATA

Specifications

Drive

HPE P18436-B21 Drive
TypeSolid-state drive
Capacity1.92 TB
InterfaceSATA 6Gb/s
EnduranceMixed use
CarrierSmart Carrier
Port configurationSingle port
NAND typeTLC

Performance & endurance

HPE P18436-B21 Performance & endurance
Rated endurance3.0 drive writes per day for 5 years
Lifetime writes10,000 TB written
Sequential read / writeUp to 516 / 480 MiB/s
Random 4K read / write (QD16)59,000 / 31,000 IOPS
Peak random 4K read / write71,000 (QD32) / 31,000 (QD4) IOPS
Average latency read / write (4K, QD1)125 / 52 µs

Security

HPE P18436-B21 Security
FirmwareDigitally signed firmware

Power & environment

HPE P18436-B21 Power & environment
Idle power1.50 W
Active power (random read / random write / sequential read / sequential write)3.90 / 3.90 / 3.20 / 4.10 W
Maximum power5.00 W

Physical

HPE P18436-B21 Physical
Drive height (z-height)7 mm
Hot-plugHot-plug, Smart Carrier
HPE P18436-B21 specifications
CategoryDrives & SSDs
Form factor2.5in (SFF)
Warranty1-year ZaynTek

§ 04Fits these servers

Offered as a configuration option for these models. An engineer confirms fit for your exact build at quote.

§ 05Related — Drives & SSDs

View all
HPE

P40504-B21

Drives & SSDs
Request quote
HPE

P18426-B21

Drives & SSDs
Request quote
HPE

P18432-B21

Drives & SSDs
Request quote
HPE

P18434-B21

Drives & SSDs
Request quote

NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.